Aerosol Leak Detector at Aerosols 2010

[ September 21, 2010 10:00 am to September 23, 2010 10:00 am. ] Bautz will be presenting the Aerocan Leak Detecting Machine capable of 60,120 or 250 cans per minute

September 21, 2010 10:00 amtoSeptember 23, 2010 10:00 am

Bautz will be presenting the Aerocan Leak Detecting Machine at Aerosols 2010 in Rome from the 21st to the 23rd September.

Come at take a look at this compact, verified Aersol Leak Detector available as an Aerocan 60, Aerocan 100 and Aerocan 200.

Raupack is Exhibiting at IMHX

[ November 16, 2010 to November 19, 2010. ] Come and find out about our Gantry Robots for Palletising, Order Picking and Material Handling

November 16, 2010toNovember 19, 2010

We will be exhibiting in the AMHSA PAvillion at IMHX from 16th – 19th November 2010. Come and see us talk about our Gantry Robots. Our Gantry Robots are used in Order Picking, as Palletisers or in Material Handling Applications.

Retrofitable Automatic Flying Web Splice System

It can be very difficult to find an web splicing system to cGMP standard. Harro Hofliger have addressed this with their retrofitable PMK300 AS unit with double unwinder, splicing units , web buffers, pull rollers, dancing rollers and independent HMI and in GMP balcony design.

It can be very difficult to find an web splicing system to cGMP standard. Harro Hofliger have addressed this with their retrofitable PMK300 AS unit with double unwinder, splicing units , web buffers, pull rollers, dancing rollers and independent HMI and in GMP balcony design.

Web widths up to 300mm and speeds up to 75m/min can be handled in either right and left hand execution

Raupack Exhibiting at Total Process and Packaging Machinery 2010

[ May 25, 2010 10:00 am to May 27, 2010 10:00 am. ] Register Here

May 25, 2010 10:00 amtoMay 27, 2010 10:00 am

We will be exhibiting at NEC Birmingham from the 25-27th May, Stand 5230
We will be presenting the following machinery:

  • The new Accura C Capsule Weighing Machine
  • Examples of our powder dosing systems
  • In-line Mass Sensors
  • Optical Inspection of Blister foils
  • Register Here

    High Resolution Mass Determination Sensor

    The AMV is a Mass determnination sensor that can measure weight inline without requiring the cycle times that weigh cells require. The Mass Determination Sensor is available as an option on our capsule weighing machines as well as our powder dosing equipment.

    We now have available a new mass determination (weighing) sensor for powders. This is available as an option on our Modu C capsule filling machines and Omnidose powder filling systems. It is compatible with both the drum filler for cohesive powders and the conventional dosator powder filler. The benefit of the sensor is that no tare weight needs to be taken and the system is much faster, being able to work in real time, than a weighcell.

    The sensor is able to determine fill weights in the range of 0,5 mg to > 500 mg. and can determine the weights of powders, granules and pellets. The sensor creates a mass proportional signal. The measured value will be transformed into a weight value using a batch-specific calibration factor.

    The variance of the sensor system, expressed as relative standard deviation when compared to a laboratory balance, is ≤ 3% for powders and pellets